单轴传动滚切式双边剪薄钢板剪后“错牙”及“飞边”的原因分析与对策

针对单轴传动滚切式双边剪生产过程中出现的薄钢板经双边剪剪后出现“错牙”及“飞边”的问题,从多个方面入手对薄钢板出现“错牙”及“飞边”的原因进行了分析对比,提出了相应的解决方案,对今后滚切式双边剪的设计、制造及安装调试有借鉴和参考价值。     

Amorphous diffusion bonding of steel pipe and its impact toughness

An iron-based amorphous foil (FeNiCrSiB) was used as an interlayer for the amorphous diffusion bonding of low carbon steel pipes under argon flux. The microstructure and mechanical properties of the joint were analyzed using an electron probe micro-analyzer (EPMA), tensile test, bending test and impact test. The results show that the joint microstructure resembles that of the base metal and no precipitates form at the joint. Melting point depressants (B, Si) diffuse far away from the joint and the base metal element is homogenous across the joint. The joint impact toughness is greater than the base metal toughness and the mechanical properties of the joint are similar around the pipe.     

Study of liquid injection impact on the performance of new refrigerant mixtures

In this paper, the test results of liquid injection impact on the performance of new alternative refrigerant mixtures such as: R-410A, R-507, R-407C and R-404A are discussed, analysed and presented. The test results were obtained using an air-source heat pump set-up with enhanced surface tubing under various liquid injection ratios. Performance tests were conducted according to the ARI/ASHRAE standards. The performance data demonstrated that as liquid injection ratio increases, compressor head pressure and discharge temperature decrease. This has a positive effect in protecting the compressor. The effect of liquid injection on mixture behaviour varies from one mixture to another depending upon the mixture's composition. Furthermore, liquid injection appears to have a significant influence on R-410A behaviour compared to the other mixtures in question. Copyright © 2002 John Wiley & Sons, Ltd.     

未增塑聚氯乙烯(PVC-U)异型材配方基础

PVC-U异型材配方十分复杂,常用原料通常在10种以上。根据大连实德集团实际生产情况,这10多种原料通常以7大组分的方式进行配料和生产。文中就该配方中7大组分的分类、特点及应用情况分别进行了详细介绍。     

Dynamic response and behavior of reinforced concrete slabs under impact loading

Reinforced concrete slabs are among the most common structural elements. In spite of the large number of slabs designed and built, the effect of their details on their behavior under impact loads are not always appreciated or properly taken into account. This experimental study was aimed at understanding the dynamic behavior of structural concrete slabs under impact loading to improve the state of the art of protective design. This study investigated the effects of different types of slab reinforcements and the applied impact loads on the dynamic response and behavior of reinforced concrete slabs.     

Daily impact of climate on the pattern of urban family life : Indigenous courtyard houses of Baghdad regions of the hot-dry climates Part I: Daily shifts or daily movements in summer

During the day, there are considerable variations in the climatic factors prevailing in these regions. This is especially so during the 24-hour daily cycle of the long, hot and dry summer (mid-May to midOctober). Such climatic conditions have had a considerable impact on the daily living pattern of family life in the same season, particularly in the urban areas. During the same 24-hour cycle, they have compelled the inhabitants to shift their living activities both vertically in section and horizontally in plan; they do this in pursuit of more acceptable, if not, desirable internal thermal environmental ambience.     

弹性杆与水下壳体接触冲击的冲击力计算研究

对弹性杆与水下壳体接触冲击问题进行了研究，用有限元法模拟壳体，边界无法模拟无限域流体，通过温面上的耦合条件进行联立求解，文中给出了典型算例，并进行了有关讨论。     

Impact of dams on point bar habitat: a case for the extirpation of the Sacramento Valley Tiger Beetle,C. hirticollis abrupta

Quantitative analyses of flow and stage data, remote sensing and geographic information systems analysis, and field studies were used to assess the impact of dams and diversions on the point bar habitat of the Sacramento Valley Tiger Beetle (Cicindela hirticollis abrupta). The reaches of interest include sites of known historic populations of C. h. abrupta along the Sacramento River from approximately 8 km north of Colusa southward to the confluence with the Feather River and along the Feather River between Yuba City and its confluence with the Sacramento River. The results from this study show that construction of two major dams has altered flows such that prolonged and increased flows during summer, fall, and early winter have most likely disrupted life cycles, flooded larvae, drowned overwintering adults and led to high mortality. Additionally, habitat availability has decreased over time because point bars have decreased in number and area causing increased distances between populations and isolation of populations. Moreover, point bar armouring, channel scouring, altered flows, redirected flows through weirs, and lithologic controls have produced a bimodal distribution of mean grain sizes in the Sacramento River in which the more northern bars contain gravel deposits and more southern bars possess fine sands. These conditions negatively alter moisture retention and sediment compaction and, consequently, burrowing conditions needed by this tiger beetle. Additionally, more stabilized flows (reduced variability) and increased fine‐grained deposition have enabled development and encroachment of vegetation onto the sand bars. Finally, human stresses, such as foot traffic and vehicular traffic may have interfered with burrowing, ovipositing, and foraging. The combination of these stress factors has most likely led to a reduction in source populations and, ultimately, the apparent extirpation of the entire metapopulation. Copyright © 2006 John Wiley & Sons, Ltd.     

织物树脂层压复合材料抗弹性能研究

针对防弹织物树脂层压复合材料的研制，考察了层压复合材料面密度，纤维类型，树脂体系，铺层混杂方式及纤维混杂分数，织物铺层，预置分层等因素对层压复合材料靶板弹道冲击性能的影响。     

Strength of Metals at High Strain Rates

Results of metal testing in impact tension–compression and indentation are analyzed. As the analysis of these data demonstrates, the strength of metals increases greatly with strain rates and at moderate indentation rates. At high indentation rates, a decrease in the specific energy (per unit volume of a displaced material) necessary for the formation of a conical cavity was observed. The account of the effects of viscosity, temperature increase upon plastic deformation and its localization can be used to explain the above phenomena.